| Engine |
| 200hp (150kW) John Deere® 6068T
liquid cooled diesel |
| Murphy PowerVue® control panel |
| Donaldson® Air Filter System with
precleaner & service indicator |
| PT Tech™ microprocessor controlled
hydraulic clutch |
| Chipper |
| 37” (940mm) diameter x 24” (600mm)
wide momentum discharge drum, two (2) pockets 180šapart |
| Full 24” (600mm) wide cut |
| Each pocket contains two (2) knives
12” (300mm) long x 5” (125mm)
wide x 5/8” (15.8mm) thick |
| Four (4) sided adjustable anvil |
| Rear pivoting feed roller |
| 60” (1524mm) wide x 34” (864mm)
high infeed chute opening |
| 25” (625mm) wide x 24” (6100mm)
high infeed throat opening |
| Heavy duty folding infeed tray 1/4” (6.4mm)
thick |
| Chassis |
| Frame 50.8 x 15.24 x 9.5mm (2" x
6" x 3/8") rectangular tubing |
| Single 8000lb (3.6T) Dexter® Torflex™ axle
with LT235/75R17.5 tyres |
| Option – Tandem Axle Configuration |
| Hydraulic front stabilizer leg (jack
stand) |
| Electric brakes with breakaway switch,
sealed wiring harness LED turn/stop indicators |
| Height adjustable tow plate with telescoping
tow bar |
| Features |
| Hydraulic swivel discharge chute |
| Hydraulic winch – installed with
cable |
| Height adjustable discharge chute with
access panel |
| Reverse Autofeed System |
| Emergency stop |
| Onboard wheel chocks |
| Flashing amber light – Code3® LED
Strobe |
| Mounted spare wheel |
| Witches hat holder |
| Sandblasted & powder coated finish |
All engine and operator controls mounted
kerbside*
* Hydraulic discharge swivel is roadside, lift & crush system
is dual control
from either side |
| Warranty |
| Machine Warranty: |
12 months against
defective materials, design, and workmanship |
| Engine Warranty: |
As per manufacturers specifications |
| Manuals: |
Operator instructions, hazard
assessment, maintenance, & spare parts manuals supplied with
each machine |
